Lightweight Access Point Configuration Commands

Configuring CAPWAP IP Address and WLC priming for Joining WLC

capwap ap ip add IP-ADDRESS SUBNET-MASK

capwap ap ip default-gateway GATEWAY-IP-ADDRESS

capwap ap controller ip add WLC-IP-ADDDRESS

Configuring Primary WLC in AP through CLI

capwap ap primary-base WLC-NAME WLC-IP-ADDRESS

Configuring and converting mobility AP to capwap AP for Joining WLC

ap-type capwap

capwap ap ip IP-ADDRESS SUBNET-MASK GATEWAY-IP-ADDRESS

capwap ap primary-base WLC-NAME WLC-IP-ADDRESS

Converting capwap AP to Mobility AP

capwap ap ip IP-ADDRESS SUBNET-MASK GATEWAY-IP-ADDRESS

ap-type mobility-express tftp://TFTP-SERVER-IP/FILE-NAME

To remove factory default ap tag 945 from AP

capwap ap ethernet tag 0 

To restart CAPWAP Process for sending joining request to newly configured capwap WLC IP Address

test capwap restart

To remove previously known IP Address from AP

debug capwap console cli

erase /all nvram:

reload

To remove previously configured controller IP from AP

clear capwap private-config

To configure AP in factory default setting

Plug AP

Press mode button do not unplug AP

Unplug AP, make sure that mode button is not released

Plug AP, make sure that mode button is not released

Wait for 30 seconds and release the mode button

To stop AP from rebooting while upgrading from lightweight to autonomous

debug capwap client no-reload